99785 3208499250 32084dweep@coolairtech.in Mon–Sat · 10:00–18:00 · Vadodara, Gujarat
  1. Home
  2. Solutions
  3. Industrial HVAC
  4. Ducting & insulation
Industrial · Ducting

HVAC ducting & insulation

GI ducting, insulation, air terminals and air balancing that deliver the design airflow to every room.

Metal ventilation ductwork
Quick answer

Ducting carries conditioned air from AHUs and ductable units to each room. Cool Air Tech fabricates and installs GI sheet metal ducts sized for the air quantity, insulates them against heat gain and condensation, fits grilles, diffusers and dampers, and balances the airflow after installation.

What our ducting work covers

GI sheet metal ductingRectangular and round ducts in galvanised iron, sized for the air quantity and velocity, with proper joints, sealing and supports.
Thermal insulationClosed-cell nitrile rubber, XLPE or glass wool with foil facing, to stop heat gain and condensation on supply ducts.
Acoustic liningInternal lining near AHUs and fans to reduce noise reaching the rooms.
Air terminalsSupply and return grilles, 4-way and square diffusers, linear slot diffusers, jet nozzles for large halls, and HEPA terminal boxes for clean rooms.
Dampers and accessoriesVolume control dampers, fire dampers, flexible connections and access doors for maintenance.
Pipe insulationInsulation of chilled-water and refrigerant piping.

Typical GI sheet thickness by duct size

Commonly used gauges as per IS 655 for low-pressure ducting. Higher pressures and special applications need heavier sheets.

Longer side of ductSheet gaugeThickness
Up to 750 mm24 G0.63 mm
751 to 1500 mm22 G0.80 mm
1501 to 2250 mm20 G1.00 mm
Above 2250 mm18 G1.25 mm

Why ducting quality matters

  • Leaky ducts waste cooled air and electricity.
  • Undersized ducts raise noise and fan power; oversized ducts waste space and money.
  • Missing or damaged insulation causes condensation, dripping and ceiling damage.
  • Unbalanced systems leave some rooms too cold and others too warm.

Testing and air balancing

After installation, we measure air quantities at grilles and diffusers and adjust dampers until each room gets its design airflow. For clean rooms this balancing also sets the pressure cascade.

See photos from our projects

Frequently asked questions

What material is used for HVAC ducting?

Most HVAC ducting in India is made of galvanised iron (GI) sheet, insulated with nitrile rubber, XLPE or glass wool. Aluminium, stainless steel or pre-insulated panels are used for special applications.

Why do AC ducts need insulation?

Insulation stops cooled air from gaining heat on its way to the rooms, and prevents condensation forming on the duct surface, which would otherwise drip and damage ceilings.

What is air balancing?

Air balancing is measuring the airflow at every grille and diffuser after installation and adjusting dampers so each room receives its design air quantity.

Which standard is used for GI duct thickness?

IS 655 is the Indian standard for metal air ducts, and SMACNA guidelines are also widely followed. Both set sheet thickness by duct size and pressure.

Last updated:

Next step

Planning a new site or upgrading cooling?

Share the area, usage and location. We will visit, assess the space and recommend the right system and brand.

Call WhatsApp